|
|
Order online or call us toll free at 877-968-7842. GM Fuel Injection Accessories
PLEASE CLICK "ADD TO MY CART" TO SEE CURRENT
PRICING If you are still contemplating how to handle your fuel pump needs, check out this unit. Complete with gas tank bulkhead, feed/return fittings, pick up tray and high performance 255 lph Walbro fuel pump. Easily capable of handling required PSI to LT-1, LS-1 and Modular 4.6 & 5.4 engines. Click here for a "HOW TO" on installing one of these units.
RADIATOR FAN RELAY AND A/C
REQUEST For Tuned Port Injection Kits only (TP-30 & TP-50). This kit allows the radiator
cooling fan to be controlled through a relay and to be turned on and off by
the GM computer. The engine idle will also compensate for the load of the
air conditioning compressor.
LT-1 & LT-4 EGR BLOCK OFF PLATES Billet aluminum EGR block off plates for your LT-1 and LT-4.
Both pieces come with a machined finish that are easily polished. Uses stock
hardware and gaskets.
TPI & LT-1 THROTTLE BODY COVER Dress up your throttle body with
this billet cover. Comes with a machined finish that is easily polished or
painted. Uses stock hardware and gaskets.
TPI EGR BLOCK OFF PLATE Billet EGR plate for TPI intakes where
the EGR is mounted on the intake directly beneath the plenum. Uses stock
hardware and gaskets.
TPI EGR TUBE BLOCK OFF PLATE
Billet EGR tube block off plate for
TPI. Uses stock hardware and gaskets.
WELD IN OXYGEN SENSOR BUNG
Steel oxygen sensor bung ready to weld into your exhaust system
KNOCK SENSOR ADAPTER This adapter bolts to your oil pan when there
is a lack of clearance in it's stock location. A real problem solver
when using block hugger headers. Made of billet aluminum. Sensor sold
separately.
GM 5 PRONG RELAY
Used on most Telervek fuel injection kits. Can be used fur fuel
pump, electric fans and more. 40 Amp rating.
FUSE ASSORTMENT Replacement fuses for your Telorvek wiring system.
Includes 1 fuse each, in 3 and 5 amp, 3 fuses each, in 10, 15, 20 and 30 amp ratings. ATC style. GM Speed
Sensors All fuel injected engine
computers require a speed signal input. If this input is not supplied to the
ECM a code will set. This sensor is used along with all the other sensors in
the ECM's many calculations per second for a proper running engine.
NOTE: The PG-5 & PG-6A
pulse generator instructions are written for installation of this product
into one of The Detail Zone's fuel injection harnesses. If you are using
another fuel injection harness supplier, the instructions WILL NOT give the
necessary information on connecting this product into the harness. This
information must be supplied by the fuel injection harness supplier. One
more reason to purchase The Detail Zone's harness.
Discontinued
Order online or call us toll free at 877-968-7842. |
TANKS
INC. FUEL PUMP MODULE
